Sharp Digital Laser Copier/Printer AR-5127 - Manual (Page 44)

AR-5127 SIMULATION 8 - 16
Operation/procedure
The data shows the use frequency of each paper feed section.
Operation/procedure
The detected machine composition is displayed.
NONE: "- - - - - - - - -" is displayed.
[ ]: Shows the product code in the list below.
*1: Installed quantity is displayed in ( ).
For the cassettes, only the option cassette is displayed.
* Execution is inhibited until GDI or PCL board is securely installed.
(Because the board is detected by the software.)
Operation/procedure
The current counter value (number of send/receive pages) of the FAX
send/receive counter and the accumulated reception time and the print
counter are displayed.
Note: Executable only when the FAX is installed.
Operation/procedure
Fourty SPF JAM history datas are displayed sequentially from the lat-
est.
Operation/procedure
Counter data is displayed.
BYPASS
Manual feed counter
TRAY3
Tray 3 counter
TRAY1 Tray 1 counter TRAY4 Tray 4 counter
TRAY2
Tray 2 counter
22-10
Purpose Adjustment/setting/operation data output/check
(display/print)
Function
(Purpose) Used to check the system configuration.
Item Specifications Option
Display items Display items
SPEED 23CPM/27CPM/25CPM
DF NONE/[1: SPF]/[2: RSPF]
OUTPUT
NONE/[3: Finisher]/[4: Job separator]
CASSETTE1 NONE/[5: One-step paper feed unit]
CASSETTE2 NONE/[6: Two-step paper feed unit]
IMC MEM
0/Expansion memory capacity (MB)
PRINTER NONE/[7: PCL]
PS3 NONE/[8: PS3]
NIC
NONE/[9: NIC]
SCANNER NONE/[10: SCANNER]
FAX
NONE/[11: FAX]
FAX MEM
NONE/Memory capacity (MB)
HAND SET NONE/[12: Handset]
No. Item
Model code
AR model DM model
1 SPF AR-SP4N DM-SP2
2 RSPF AR-RP3N DM-RP1
3 Finisher AR-FN5N DM-FN1
4 Job separator AR-TR3 STANDARD
5 1 tray paper feed unit AR-D11N (*1) DM-DE3 (*1)
6 2 tray paper feed unit AR-D12N (*1) DE-DE4 (*)
7 PRINTER GDI: AR-EB4 STANDARD
8 PS3 AR-PK1 STANDARD
9 NIC AR-NC5J STANDARD
10 SCANNER AR-NS2 DM-NS1
11 FAX AR-FX4 DM-FX2
12 Handset AR-HN4 –
Sim22-9 FEED 1/2
BYPASS : nnnnnnn
TRAY1 : nnnnnnn
TRAY2 : nnnnnnn
TRAY3 : nnnnnnn
Sim22-10 SYSTEM 1/4
SPEED : XXXXXXX
DF : XXXXXXX
OUTPUT : XXXXXXX
CASSETTE1: XXXXXXX
22-11
Purpose Adjustment/Setting/Check
Function
(Purpose) FAX related counter display
22-12
Purpose Adjustment/setting/operation data output/check
(display/print)
Function
(Purpose) Used to check the misfeed positions and the number of
misfeed at each position. (When the number of
misfeed is considerably great, it can be judged as
necessary for repair.)
Section SPF
Item Trouble Mis-feed
Error code Name Sensor name
Paper Reached/
Not reached to
Sensor
PI_TOP
SPF paper-in
lead edge jam SPF P-IN sensor Not reached
PI_END SPF paper-in rear
edge jam SPF P-IN sensor Reached
JAM_REV SPF duplex
reversion jam SPF P-IN sensor Not reached
(paper after
reversion)
PO_TOP
SPF paper-out
lead edge jam SPF P-IN sensor Reached, P-
OUT not
reached
PO_END
SPF paper-out
rear edge jam SPF P-OUT
sensor Reached, P-IN
is passed (OFF).
ORG_LONG SPF long size
error SPF P-OUT
sensor Reached
SPF P-IN sensor Reached
ORG_SHORT
SPF short size
error SPF P-IN sensor Pass (OFF at
JAM)
22-19
Purpose Adjustment/setting/operation data output/check
(display/print)
Function
(Purpose) Used to display the scanner mode counter.
Item Trouble
SCANMODE Scanner mode counter
Sim22-12 SPF JAM1/5
XXXXXXX XXXXXXX
XXXXXXX XXXXXXX
XXXXXXX XXXXXXX
XXXXXXX XXXXXXX
Sim22-19 SCAN MODE
SCANMODE:nnnnnnnnn