Sanyo DSR - 300 - Manual (Page 107)

MENU-SPECIFIC SETTINGS 2
106
English
NETWO
R
K
SE
T
T
IN
G
S
(when optional interface board is installed)
Audio can be recorded together with images when
performing alarm recording. Note, however, that since this
audio data will also be stored in the alarm recording area,
the recording time for this area will be reduced.
3
Select “AUDIO RECORDING”.
[Settings] (‹ indicates default setting.)
z Audio recording can only be specified when the
recording rate is more than A 5.00/10.00 FPS.
In order to carry out alarm recording, it will be necessary to
set operation patterns and recording conditions.
4
Select a mode using “ALARM
RECORDING”.
[Settings] (‹ indicates default setting.)
5
Select “REC RATE”.
A 30.00/60.00, A 15.00/30.00, A 10.00/20.00, A 7.50/15.00,
A 5.00/10.00, 3.75/7.50, 3.00/6.00, 2.50/5.00, 2.14/4.29,
1.88/3.75, 1.67/3.33, 1.50/3.00, 1.36/2.73, 1.15/2.31,
1.00/2.00, 0.83/1.67, 0.71/1.43, 0.63/1.25, 0.56/1.11,
0.50/1.00, 0.25/0.50, 0.17/0.33, 0.13/0.25, 0.10/0.20,
0.05/0.10, 0.03/0.05, 0.02/0.03 (Unit: FPS)
6
Set the duration for alarm recording
using “DURATION”.
1 SEC, 2 SEC, 5 SEC, 10 SEC, 20 SEC, 40 SEC, 1 MIN,
2 MIN, 3 MIN, 4 MIN, 5 MIN, 10 MIN, 15 MIN, *CC
(Default setting: 1 SEC)
*CC: Operates while an alarm is being activated.
Setting audio recording
Setting Description
ON Audio will be recorded.
‹ OFF Audio will not be recorded.
Setting alarm recording
Setting Description
‹ OFF Does not perform alarm recording.
ENABLED
Alarm recording is always performed,
regardless of timer recording or timer settings.
AL-REC ON
TIMER Alarm recording is performed only during timer
recording.
AL-REC OFF
TIMER Alarm recording is performed only during
recording other than timer recording.
OLY AL-RC
ON TMR
Alarm recording is performed only in the
period set for timer recording without timer
recording actually being performed.
5
4
6
e00_l8had_us_7.book Page 106 Wednesday, March 10, 2004 2:47 PM