Sanyo DSR - 300 - Manual (Page 132)

DVR VIEWER 6
English
131
(when optional interface board is installed)
In the case of images on a CD-R, the control panel
includes buttons that can be used for saving images, so
that images can be saved on another storage medium as
described below. You can specify an existing folder to use
or create a new folder, and you can also set your own
filenames for the files being saved.
1
Specify the start image and end image
to be saved.
Click [Set Copy Start image] and then use playback
operations to select the start image. Then when playback
is stopped, click [Set Copy End image] to set the starting
point for the images to be copied using the image
numbers.
Specify the copy end point in the same way.
2
Click [Start Copy].
The [SAVE AS] dialog box appears.
3
Specify the saving destination and the
filename, and then click [Save].
The specified images will then be saved.
The filenames for each image will be generated
automatically based on the number of images being
copied and the filename you entered.
Example: If the number of images copied is “100” and
the filename is “SAMPLE”:
SAMPLE000.JPG
SAMPLE001.JPG
↓
SAMPLE099.JPG
Saving images
[Set Copy Start image]
[Set Copy End image]
[Start Copy]
11/05/2004 18:56:10
e00_l8had_us_7.book Page 131 Wednesday, March 10, 2004 2:47 PM