Sanyo DSR - 300 - Manual (Page 80)

English
79
6
HDD SET
This section describes how to initialize the hard disk.
1
Press the [MENU] button twice.
The <MAIN MENU 2> screen appears.
2
Press the [ ] or [ ] button to select
“6. HDD SET” and press the [ ] button.
The <HDD SET> screen appears.
The cursor is positioned on “DISK INITIALIZE”.
3
Press the [ ] button.
The <WARNING> screen is displayed, with “NO” flashing.
4
Press the [ ] and [ ] buttons to select
“YES” and press the [ ] button.
The “HDD INITIALIZING!” screen is displayed, and the
hard disk is initialized.
When the process has finished, the display returns to the
menu screen.
5
Press the [EXIT/OSD] button.
The display returns to the normal screen.
<MAIN MENU 2>
[ ] button
[MENU] button
[ ] button
[ ] button [EXIT/OSD] button
Initializing the hard disk
e00_l8had_us_7.book Page 79 Wednesday, March 10, 2004 2:47 PM