Sanyo DSR - 300 - Manual (Page 112)

MENU-SPECIFIC SETTINGS 2
English
111
(when optional interface board is installed)
This screen displays the total capacity of the hard disk.
(1) Hard disk capacity
Displays the total capacity of the hard disk.
Check the date and time of power failures and the amount
of hard disk usage as described below.
14. HDD SET
15. POWER FAILURE/USED TIME
Setting Description
(1)
POWER
FAILURE
Displays the number of power failures, the
corresponding date and time, and the date
and time of restoration of power.
(2) USED TIME
Displays the usage time for the digital video
recorder.
DISK1 USE: Total usage time for Disk 1
POWER: Total usage time for the unit
(3) FIRMWARE Displays the firmware version.
(1)
(1)
(2)
(3)
e00_l8had_us_7.book Page 111 Wednesday, March 10, 2004 2:47 PM