Sanyo DSR - 300 - Manual (Page 54)

English
53
3
RECORDING AREA SET
Follow the procedures below to confirm all recording areas
on the hard disk and the allocation for each recording area.
1
Press the [MENU] button.
The <MAIN MENU 1> screen appears.
2
Select “3. RECORDING AREA SET” and
press the [ ] button.
The <RECORDING AREA SET> screen is displayed.
„ Default hard disk settings
By default, the normal recording area is set to 80%; the
alarm recording area, to 19%; and the archive area, to
1%. The highest possible allocation for the archive area
is 10GB.
z When the recording area settings are changed, the disk
is initialized and all previous recordings are erased. It is
important, therefore, to store recorded images on a PC
or some other storage media before modifying
recording areas.
<MAIN MENU 1> [MENU] button [ ] button
[ ] button
[ ] button
[EXIT/OSD] button
Displaying the recording area
Description
(1)
Displays the total
capacity of the hard
disk.
(2)
Sets the capacity of the
normal recording area.
(3)
Sets the capacity of the
alarm recording area.
(4)
Sets the capacity of the
archive area.
(1)
(2)
(3)
(4)
Normal
recording area
Alarm
recording area
Archive area
Hard disk’s recording areas
Alarm recording area
Archive area
Normal recording
area
1%
80%
19%
e00_l8had_us_7.book Page 53 Wednesday, March 10, 2004 2:47 PM