Selecting the input picture and sound, Selecting the input picture, Switching the displayed picture – Sony PCS-G70P User Manual
Page 100: Between the local and remote pictures
100
Selecting the Input Picture and Sound
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\05OPE.FM
masterpage:Left
Selecting the Input Picture and Sound
This section describes how to switch the picture displayed on the monitor
screen, and how to switch the input picture and sound.
1
Press the FAR/NEAR button on the Remote Commander.
The Display Control menu appears.
2
Use the
V, v, B or b button on the Remote Commander to select “Near” or
“Far” under “Display”.
3
Press the PUSH ENTER button on the Remote Commander.
1
Press the VIDEO INPUT SELECT button on the Remote Commander.
The Video Input Select menu appears.
2
Use the
V, v, B or b button on the Remote Commander to select the video
input on the local site.
While in communication you can switch the video input of the remote system by
selecting “Far” in the Video Input Select menu.
Switching the Displayed Picture Between the Local and Remote
Pictures
Selecting the Input Picture
Note
Display Control
Display
Far
Control
Near
Camera