Launcher menu – Sony PCS-G70P User Manual

Page 28

Advertising
background image

28

Turning the System On/Off

PCS-G70/G70P

3-863-237-11 (1)

Y:\04C08060_passage\EDIT\03OVR.FM

masterpage:Left

Launcher menu

• After the power is turned on, the camera moves automatically for trial operation. Be

careful not to catch your finger.

• If you use force to prevent the camera moving, it may not resume moving and not

output a signal to the Communication Terminal. In this case, turn off the terminal, and
turn it on again.

• When you turn on the power of the Communication Terminal for the first time after

installation, the setup wizard will appear after the self-diagnosis is completed. Set up
your system following the wizard.

For setups using the wizard, see “Setting Up the System for the First Time

— Initial Setup Wizard” on page 33.

• Used with an optional device especially designed for use with this system, such as the

Data Solution Box or ISDN Unit, for the first time, the Communication Terminal may
automatically upgrade the software of the connected device. While the upgrading
message is displayed on the monitor screen, be sure not to turn off the Communication
Terminal. Doing so may cause malfunction of the system. System malfunction may
also occur when a system power-off has been caused by an accidental problem such
as a power interruption during upgrading. If connection of the Data Solution Box or
ISDN Unit to the Communication Terminal is not re-established even after the system
power is recovered, consult a Sony dealer.

Notes

IP: 012.345.678.678
ISDN: 012345678956789

Tokyo

New York

Paris

AUTO

Phone Book

Detail Dial

History

Menu

Information

Dial

Enter the remote party number.

Advertising
This manual is related to the following products: