Sony PCS-G70P - Manual (Page 150)

150
Using Audio/Video Signal from the Connected Equipment for a Conference
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\07OPE.FM masterpage:Left
When the PCS-11/11P is used as a receiving terminal
: High, a : Middle, f : Low
When a videoconferencing system other than the PCS-G70/G70P or
PCS-11/11P such as the PCS-1600 is used
: High, a : Middle, f : Low
Resolution Video
frame
rate Remarks
a a Outputs the signal by converting a transmitted VGA, SVGA or XGA
signal into a 4CIF signal. The original high-resolution picture cannot be
obtained and details cannot be clearly seen. The number of frames
displayed per second depends on the interface transmission rate. For
example, one frame per second is obtained at 1 Mbps.
Resolution Video
frame
rate Remarks
a f Sends and receives the pictures in 4CIF, and the original high-resolution
picture cannot be obtained and detailed portion cannot be clearly seen.
The number of frames displayed per second depends on the interface
transmission rates. For example, one frame per several seconds is
obtained.