Sony PCS-G70P User Manual
Page 203
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\10OTH.FM
masterpage:Left
203
On-screen Messages
Connection with the Data Solution Box is
not correct. Please reset the system.
Connection between the Communication Terminal
and the Data Solution Box is not correct. Turn off
the Communication Terminal, then turn it on again.
Fan in the Data Solution Box does not work
properly. The Data Solution Box is not
usable.
The fan equipped with the Data Solution Box is not
working properly. You cannot use the Data Solution
Box.
The Whiteboard cannot be used.
The whiteboard can be used for a videoconference
only between PCS-G70/G70P systems.
Battery in the stylus could be weak. Replace
the battery.
The battery in the stylus for the whiteboard is low.
Replace the battery in the stylus with a new one.
The far-end system is not compatible with
the encryption feature.
When conducting an encrypted videoconference
via LAN, you cannot connect to the system that is
not compatible with the encryption via LAN
feature.
The encryption feature on a far-end system
is disabled.
When conducting an encrypted videoconference
via LAN, you cannot connect to the system if the
encryption via LAN feature is deactivated.
The encryption feature on a far-end system
is enabled.
When conducting a daily conference, you cannot
connect to the system if the encryption via LAN
feature is activated.
The entered password for the encryption
feature is not correct.
Enter the correct password.
The encrypted videoconference is not
available if any terminal is connected via
ISDN.
While the videoconference is held via the ISDN
connection, you cannot connect any terminal via
the LAN connection if your encryption via LAN
feature is activated.
At least thirteen characters are required as a
password for the encryption feature.
You have to enter 13 to 20 characters, numbers or
symbols as the password required for conduct of an
encrypted videoconference via LAN.
PPPoE connection has failed.
LAN connection has failed. Check the PPPoE
setting.
PPPoE server admission has failed.
Access to a network is not admitted by the PPPoE
server.
Connection to the PPPoE server fails.
Check the DNS server setting.
Communication via LAN is not available.
Check the LAN cable.
The connection to a LAN cannot be made. Check
the LAN cable.
An IP address is not obtained via DHCP.
Check the DHCP setting.
Please dial by entering the IP address.
Be sure to enter the IP address of the remote party
when dialing.
Reference to DNS has failed.
The LAN connection has failed as you entered the
user name when using the domain name server.
Enter the IP address.
Your system attempts to connect to other
equipment than a videoconferencing system.
Connect your system to the videoconferencing
system.
Message
Meaning