Sony PCS-G70P - Manual (Page 106)

106
Conducting a Videoconference Using the Dual Video Function
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\05OPE.FM masterpage:Left
.
• When you want to conduct a videoconference using the dual video function, the
H.239 setting of the Communication Setup menu of both local and remote terminals
must be “On”.
• Up to four monitors can be connected to the system. However, only three monitors,
including the first monitor, can be used at one time.
For details, see “Using Multiple Monitors” on page 122. The dual video
function can only be used in a two-point videoconference.
Second camera
Camera cable (supplied)
PCS-PG70/PG70P
Communication Terminal
to SUB CAMERA
to VIDEO OUT
MONITOR 2 to RGB
OUT to DSB
PCSA-DSB1S
Data Solution Box
(not supplied)
Additional monitor A
(projector, etc.)
Additional monitor B
(projector, etc.)
Additional monitor C
(projector, etc.)
First monitor
to S-video input
Signal cable
(not supplied)
First camera
to MAIN CAMERA
S-video cable (not supplied)
PCSA-CG70/
CG70P Camera
Unit (supplied)
Camera cable
(supplied)
Signal cable
(not supplied)