Sony PCS-G70P - Manual (Page 43)

PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\04SET.FM masterpage:Left
43
Registering Local Information
This chapter describes the registration and
settings to be carried out by the system
administrator.The chapter is intended to be
read by the system administrator.
Registering Local
Information
Before starting a conference, register the
required information on the local terminals
of the system using the Setup menu for
administrator. This section describes how to
display the Setup menus for the
administrator and gives a introduction to the
menus.
1
Press the MENU button on the
Remote Commander, or use the
V, v,
B or b button to select “MENU” in the
launcher menu, then press the PUSH
ENTER button.
The Setup menu appears on the monitor
screen.
2
Hold down the MENU button.
The Setup menu for the administrator
appears on the monitor screen.
You can also display the Setup menu for
the administrator by pressing the numeric
button 9 on the Remote Commander twice
while the Setup menu or the screen in
communication is displayed.
Choosing the following items from the
Setup menu for the administrator opens
the respective menus.
Dial: Dial Setup menu (see page 44)
Answer: Answer Setup menu (see page
46)
Communication: Communication
Setup menu (see page 46)
Status: Status menu (see page 49)
Audio: Audio Setup menu
(see page 50)
Video: Video Setup menu
(see page 52)
General: General Setup menu
(see page 53)
Administrator: Administrator Setup
menu (see page 56)
LAN: LAN Setup menu (see page 59)
ISDN: ISDN Setup menu (see page 64)
Information: Information menu (see
page 67)
3
Use the V, v, B or b button on the
Remote Commander to select the
menu you want to set, then press the
PUSH ENTER button.
Chapter 2:
Registration and
Setup for System
Administrators
Opening the Setup Menu for
the Administrator
Setup
Press and hold the [MENU] button to show more
detailed setup menus.
Note
Dial
Communication
Audio
General
Information
LAN
Answer
Status
Video
Administrator
ISDN
Setup