Connecting the external mcu, Activating the chair control – Sony PCS-G70P User Manual

Page 188

Advertising
background image

188

Connecting the External MCU

PCS-G70/G70P

3-863-237-11 (1)

Y:\04C08060_passage\EDIT\09OPE.FM

masterpage:Left

Connecting the External MCU

Connecting the external MCU (Multipoint Control Unit) enables conduct of a
multipoint videoconference unless the MCU software is installed into the
Communication Terminal.

If the MCU for the ISDN connection is equipped with the chair control
function, the chair control can be activated for up to 99 terminals connected.
The chair control mode allows you to specify any terminal to display on the
monitor screen, to broadcast the specified picture to all the terminals, or to
broadcast the local picture to all the terminals.

1

Press the FAR/NEAR button on the Remote Commander.
The Display Control menu opens.

2

Use the

V, v, B or b button to select “Chair Request” under “Broadcast

Mode”.

Activating the Chair Control

POWER

POWER

POWER

POWER

POWER

LAN or ISDN

MCU

PCS-PG70/
G70P

Display Control

Display

Far

Control

Near

Camera

Broadcast Mode Terminal

1

Chair

Request

Advertising
This manual is related to the following products: