Preparing for an encrypted videoconference via lan – Sony PCS-G70P User Manual

Page 160

Advertising
background image

160

Preparing for an Encrypted Videoconference via LAN

PCS-G70/G70P

3-863-237-11 (1)

Y:\04C08060_passage\EDIT\08SIG.FM

masterpage:Left

Preparing for an Encrypted
Videoconference via LAN

To start an encrypted videoconference, each terminal has to set the same
password and set “Encryption via LAN” to “On” in the LAN Setup menu.

1

Enter a password using 13 to 20 alphabetical characters, numbers, or
symbols.

2

Select “On” for “Encryption via LAN” in the LAN Setup menu.

For details on setting, see “Encryption via LAN Page 1/1” on page 63.

• If you set “Encryption via LAN” to “On”, you cannot connect to a terminal that is not

equipped with the encryption feature to a terminal with “Encryption via LAN” set to
“Off”, or to a terminal without the same password as that of your system.

• You can conduct a videoconference without an encryption feature with a terminal

connected via an ISDN even if you set “Encryption via LAN” to “On”.

Notes

Encryption via LAN

Encryption via LAN

On

Page:

1/1

Encryption Password

LAN

Save

Cancel

Advertising
This manual is related to the following products: