Sony PCS-G70P - Manual (Page 189)

PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\09OPE.FM masterpage:Left
189
Connecting the External MCU
3
Press the PUSH ENTER button on the Remote Commander.
The chair control is activated and you can control up to 99 terminals. The chair
control feature is canceled if you set “Broadcast Mode” to “Chair Release”.
When you operate incorrectly, the message “MCU operation rejected.” will appear
on the monitor screen.
Displaying the picture of the selected terminal
1
Open the Display Control menu.
2
Use the V, v, B or b button to select “Receive” under “Broadcast Mode”.
3
Use the V, v, B or b button to select the number of the terminal you want
to view in the box under “Terminal”, then press the PUSH ENTER button.
The picture of the selected terminal is displayed on the local screen.
• When no terminal is selected, the picture of the smallest terminal number will be
displayed.
• The terminal number is assigned to a terminal based on the information on each
terminal obtained from the MCU.
To broadcast the selected picture to all terminals
1
Open the Display Control menu.
2
Use the V, v, B or b button to select “Broadcast” under “Broadcast Mode”.
3
Use the V, v, B or b button to select the number of the terminal you want
to broadcast in the box under “Terminal”, then press the PUSH ENTER
button.
The picture of the selected terminal is displayed on the local screen and is
broadcast to all terminals.
To broadcast a local picture to all terminals
1
Open the Display Control menu.
2
Use the V, v, B or b button to select “Broadcast” under “Broadcast Mode”.
3
Use the V, v, B or b button to display “0” in the box under “Terminal”,
then press the PUSH ENTER button.
The local picture is broadcast to all terminals. The
indicator is shown on
the monitor screen.
Note
Notes