Sony PCS-G70P - Manual (Page 134)

134
Sending Audio/Video from the External Equipment to a Remote Party
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\06OPE.FM masterpage:Left
Sending Audio/Video from the External
Equipment to a Remote Party
The Communication Terminal allows you to send the picture and sound output
from the connected equipment such as a VCR to the remote party.
To connect the video equipment for input
The Communication Terminal is equipped with two video inputs.
Be sure to connect the audio cable to either of two VCRs.
To input audio/video from external equipment
To input video
Open the Video Input Select menu by pressing the VIDEO INPUT SELECT
button on the Remote Commander, then select the desired video input from the
“Near” text box in the menu.
To input the video from the equipment connected to the MAIN AUX IN or
SUB AUX IN jack, choose “AUX 1” or “AUX 2”, respectively.
Note
TERMINAL VISCA OUT
(MIXED) AUX
AUX MONITOR
LINE
AUX CONTROL
MCU VIDEO OUT
VIDEO OUT
AUDIO OUT AUDIO IN MIC MAIN SUB
EC-MIC CTRL-S RGB OUT DSB ISDN UNIT IR OUT 1 2
1 2 3 4 1 2
1 2
1 2
5 DC 19.5V
CAMERA CAMERA AUX IN AUX IN
WHITE BOARD 100BASE-TX/ 10BASE-T
(PLUG IN POWER)
to
MAIN
AUX
IN
to video
output
VCR, etc.
Video cable (not supplied)
to S-video
output
to AUDIO IN
VCR, etc.
to audio
output
Audio cable (not supplied)
Video
conversion cable
(supplied)
to
SUB
AUX
IN
S-video cable (not supplied)