Sony PCS-G70P - Manual (Page 116)

116
Sending Motion Pictures as Still Images
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\06OPE.FM masterpage:Left
During communication a motion picture output from an external camera or
VCR connected to the Communication Terminal can be frozen, and then sent
to the remote party.
To send a still image
1
Open the Still Image menu.
Press the MENU button on the Remote Commander to display the Setup menu,
then select the
(still image) icon with the V or v button.
2
Display the picture you want to send on the monitor screen.
Press the VIDEO INPUT SELECT button on the Remote Commander to
display the Video Input Select menu, then select “AUX1” under “Near”, and
press the PUSH ENTER button.
• Still images can only be sent from the device connected to the MAIN AUX IN
connector.
• Selecting “IR1” or “IR2” allows you to display images input from the optional
PCS-DS150/DS150P Document Stand on the monitor.
• If you label “Main Camera”, “Sub Camera”, “IR1”, “IR2”, “AUX1”, or “AUX2”
in Custom Input Label in the Video Setup menu, the specified name for each
camera is displayed in the Video Input Select menu.
3
Use the V, v, B or b button on the Remote Commander to select “Send”,
then press the PUSH ENTER button.
The motion picture on the monitor screen freezes, and a still picture is sent to
the remote party. The still picture remains even after sending.
To cancel the still image display on the answering site
Select “Clear”, or switch the input picture.
Sending Motion Pictures Input from an External Camera or Other
Equipment as Still Images
Notes
TERMINAL VISCA OUT
(MIXED) AUX
AUX MONITOR
LINE
AUX CONTROL
MCU VIDEO OUT
VIDEO OUT
AUDIO OUT AUDIO IN MIC MAIN SUB
EC-MIC CTRL-S RGB OUT DSB ISDN UNIT
IR OUT
1 2
1 2 3 4 1 2
1 2
1 2
5 DC 19.5V
CAMERA CAMERA AUX IN AUX IN
WHITE BOARD 100BASE-TX/ 10BASE-T
(PLUG IN POWER)
to S-video
output
to video
output
S-video cable (not supplied)
to MAIN
AUX IN
Video cable (not supplied)
EVI-D100 camera (not supplied)
or BRC-300 camera (not supplied)
VISCA cable (not supplied)
VCR, etc.
Video converter
cable (supplied)