Sony PCS-G70P - Manual (Page 122)

122
Using Multiple Monitors
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\06OPE.FM masterpage:Left
Using Multiple Monitors
By connecting several monitors to the system, you can display different
material, such as video or still images, on different monitors.
By connecting two monitors, you can use one as a video-only display.
To connect a second monitor
To connect a second monitor, simply connect it to the VIDEO OUT
MONITOR 2 or RGB OUT connector of the Communication Terminal, or the
RGB OUT connector of the Data Solution Box.
If your second monitor is a Sony monitor, connect the supplied IR repeater
immediately under the monitor's remote sensor, and connect the other end of
the IR repeater cable to the IR OUT 2 connector of the Communication
Terminal.
Using Two Monitors–Dual Monitor Setup
First monitor
Signal cable
(not supplied)
to S-video input
to audio input
Audio cable
(supplied)
IR repeater
(supplied)
to IR out 1
to IR out 2
to
AUDIO
OUT
to VIDEO
OUT
MONITOR 2
Additional monitor A
(projector, etc.)
PCSA-DSB1S Data Solution
Box (not supplied)
to VIDEO
OUT
MONITOR 1
to DSB
to RGB OUT
Additional monitor B
(projector, etc.)
to S-video input
Additional monitor C
S-video cable
(not supplied)
under the remote sensor IR repeater (supplied)
S-video cable (supplied)