Sony PCS-G70P - Manual (Page 145)

PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\07OPE.FM masterpage:Left
145
Connection Example Using the Data Solution Box
To use the Communication Transducer connected to the Data Solution Box
• Set “CTE” on page 1 of the Audio Setup menu to “DSB AUX IN” (page 50).
• Set the SYSTEM SELECT switch at the bottom of the Communication
Transducer to “PCS”.
You cannot use two or more Communication Transducers in a room and cannot use it
together with other microphones.
For detailed information on the Communication Transducer, refer to the
Operating Instructions that come with the Communication Transducer.
Connecting the CTE-600 Communication Transducer
Note
to a wall
outlet
to AUX IN
to an input/output connector
to an input/output
connector
Cable (supplied
with the CTE-600)
to LINE
OUT
Cable (not supplied)
PCSA-DSB1S Data Solution Box (Rear)
CTE-600
AC adaptor
(supplied with
the CTE-600)
Interface box
(supplied with the CTE-600)
to DC 6V
to AUX OUT
to LINE
IN