Sony PCS-G70P - Manual (Page 154)

154
Connection Example With a Whiteboard
PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\07-2WB.FM masterpage:Left
Connection Example With a Whiteboard
• Be sure to turn off all the equipment before making any connections.
• Do not connect/disconnect the cable with the power on. Doing so may damage the
Camera Unit, Communication Terminal or mimio Xi.
Notes on using the mimio Xi
• Do not use any cable other than the dedicated cable supplied with the
recorder.
• Attach the capture bar at the upper left corner of the whiteboard.
• Use only the stylus, marker and eraser that come with the mimio Xi for
writing on a whiteboard.
• Do not connect a device other than the mimio Xi to the WHITE BOARD
connector on the Communication Terminal.
Notes
TERMINAL VISCA OUT
(MIXED) AUX
AUX MONITOR
LINE
AUX CONTROL
MCU VIDEO OUT
VIDEO OUT
AUDIO OUT AUDIO IN
MIC
MAIN SUB
EC-MIC
CTRL-S
RGB OUT DSB ISDN UNIT
IR OUT
1 2
1 2 3 4
1 2
1 2
1 2
5
DC 19.5V
CAMERA CAMERA AUX IN AUX IN
WHITE BOARD 100BASE-TX/ 10BASE-T
(PLUG IN POWER)
Whiteboard
mimio Xi capture bar
to WHITE BOARD
Dedicated cable
(supplied with the mimio Xi)