Sony PCS-G70P - Manual (Page 173)

PCS-G70/G70P
3-863-237-11 (1)
Y:\04C08060_passage\EDIT\09OPE.FM masterpage:Left
173
Setting for a Multipoint Videoconference
You can register the multipoint connection list that includes all remote parties
for a multipoint videoconference in the Phone Book. It allows you to dial all
the parties simultaneously.
You can enter new remote parties to register the multipoint connection list, or
add the parties registered in the Phone Book to the multipoint connection list.
To register a multipoint connection list in the Phone Book
The basic procedure for registration is the same as the registration of a remote
party for a point-to-point videoconference.
For details on the procedure, see “Registering a New Remote Party” on page
68.
1
Select “New Entry” in the Phone Book menu to display the List Edit menu,
then enter the name of the multipoint connection list in the Index text box.
For details on entry, see steps 1 to 3 “Registering a New Remote Party”
on page 68.
2
Select “Multipoint” under “Line I/F”.
3
Select the line interface icon or a still image to be displayed in the Phone
Book.
The icon is shown as “
”.
4
Set up the line interface of the remote parties.
When PCSA-M3G70 H.323 MCU software (for LAN) is installed
Select “IP”, and enter the IP addresses of all the parties for the multipoint
videoconference in text boxes A to E.
Registering the Remote Parties in the Multipoint Connection List
List Edit
IP
Index MULTI LIST
Line I/F
LAN Bandwidth
IP
1024 Kbps
Save Cancel
List Edit
IP
LAN Bandwidth
1024 Kbps
Save Cancel
ISDN
ISDN (Telephone)
Multipoint