Pcs-rg70 remote commander, Pcs-rg70 remote, Commander – Sony PCS-G70P User Manual

Page 196

Advertising
background image

196

Location and Function of Parts and Controls

PCS-G70/G70P

3-863-237-11 (1)

Y:\04C08060_passage\EDIT\10OTH.FM

masterpage:Left

You can set for a beep not to sound by
pressing the button on the Remote
Commander with the Audio Setup menu.

For the setting, see “Audio Setup Menu” on

page 50.

a

MIC ON/OFF button
Turns off the local sound to be sent to a
remote party. To restore the sound, press
the button again.

b

VOLUME +/– buttons
Adjusts the volume of the sound
received from a remote party.
+: to increase the volume
–: to decrease the volume

c

PinP (BACK SPACE) button
Displays a window picture when pressed
during communication.
Each time you press this button, the
location of the window picture changes.
Pressing the button displays the picture
in full screen while the Camera menu
opens.
When used for character input, deletes
the character you entered last.

d

VIDEO INPUT SELECT
(SYMBOL) button
Selects the video input signal. Each time
you press the button, the input signal
switches.
Used to enter a symbol for character
input.

e

Arrow buttons (V/v/B/b)
Used to select the menu or make various
settings in the menu. Also used for
camera angle adjustment.

f

PUSH ENTER button
Executes the selection or setting in the
menu and goes to the next layer.

g

RETURN button
Used to return to the previous layer in
the menu.

h

Number

(0-9, , )

buttons

Used to enter the letters or numbers of a
telephone number, etc.
Used for focus, brightness and backlight
compensation adjustments.

i

Battery compartment (rear)
Insert two size AAA (R03) batteries.

PCS-RG70 Remote
Commander

16

-RG70

MENU

MENU

Advertising
This manual is related to the following products: