System configuration via a lan, And isdn for multipoint data conference – Sony PCS-G70P User Manual

Page 22

Advertising
background image

22

System Configuration

PCS-G70/G70P

3-863-237-11 (1)

Y:\04C08060_passage\EDIT\03OVR.FM

masterpage:Left

Installing the optional PCSA-M3G70 H.323 MCU software, the PCS-M0G70
H.320 MCU software, and using the optional Data Solution Box PCS-DSB1S
and ISDN Units PCSA-B384S, PCSA-B768S, or PCSA-PRI enables you to
conduct multipoint mixed LAN and ISDN line multipoint data conferences.
Two Communication Terminals where the MCU software is installed must be
connected via a LAN in this configuration.

This allows you:
• To hold a multipoint videoconference among up to six sites over ISDN.
• To show still images stored on a “Memory Stick”.
• To use data from a computer or other such peripheral device in the

videoconference.

• To show still images or computer data on the second monitor or projector

used as the display device.

• To connect up to five external microphones to the Data Solution Box,

allowing you to hear several participants.

System configuration

System Configuration via a LAN and ISDN for Multipoint Data
Conference

*

1

PCS-PG70/PG70P Communication Terminal

2

PCSA-CG70/CG70P Camera Unit

3

PCS-RG70 Remote Commander

4

TV monitor (not supplied)

5

PCSA-M3G70 H.323 MCU software (not supplied)

6

PCSA-DSB1S Data Solution Box (not supplied)

7

PCS-A1 Microphone (not supplied)

8

PCSA-M0G70 H.320 MCU software (not supplied)

9

PCSA-B384S, PCSA-B768S or PCSA-PRI ISDN
Unit (not supplied)

*

Be sure to connect two
Communication Terminals, with
the MCU software installed, via
a LAN.

*

The illustration shows an
example using the PCSA-B768S
ISDN Unit.

Advertising
This manual is related to the following products: