Standby mode function – Sony PCS-G70P User Manual

Page 29

Advertising
background image

PCS-G70/G70P

3-863-237-11 (1)

Y:\04C08060_passage\EDIT\03OVR.FM

masterpage:Left

29

Turning the System On/Off

To save power, the Communication Terminal will enter standby mode if you
do not operate it for a specified period of time.
When the Communication Terminal is in standby mode, the POWER indicator
lights in orange. Once the Communication Terminal receives a call, the
standby mode is automatically released.

To release the standby mode
Press the @/1 button on the Remote Commander.

To specify the standby time
Specify the time that you want the system to remain on before entering into
standby mode (1 to 99 minutes) by selecting “Device Setup” on the General
Setup menu, and then setting “Standby Time”. If you do not want the system
to enter the standby mode, set “Standby Mode” to “Off”.

For the “Standby Time” and “Standby Mode” settings, see “General Setup

Menu” on page 53.

• The POWER indicator on the camera goes off when the system enters standby mode.
• If you use a Sony TV monitor with the IR repeater installed under the remote sensor,

the TV monitor will enter standby mode together with the Communication Terminal.

Standby Mode Function

Notes

Advertising
This manual is related to the following products: