Sony PCS-G70P User Manual

Page 33

Advertising
background image

PCS-G70/G70P

3-863-237-11 (1)

Y:\04C08060_passage\EDIT\03OVR.FM

masterpage:Left

33

Setting Up the System for the First Time — Initial Setup Wizard

Setting Up the
System for the First
Time — Initial Setup
Wizard

When you turn on the Communication
Terminal for the first time after installation
and the self-diagnosis is completed, the
setup wizard appears on the monitor screen.
Register your local system data with the
setup wizard using the Remote Commander.

• You can change the settings made with the

setup wizard later using the Setup menus.

• The setup wizard will also be displayed when

you install the PCSA-B384S, PCSA-B768S,
or PCSA-PRI ISDN Unit to your system
later. Perform the setup again.

1

Select the language used for the on-
screen menus and messages in the
Language Setup Wizard.
Language: Select one of the following

languages; English, French, German,
Japanese, Spanish, Italian, Simplified
Chinese, or Portuguese.

2

Use the

V, v, B or b button on the

Remote Commander to select “Next”,
then press the PUSH ENTER button.
The Monitor Setup Wizard appears.

3

Select a monitor from which signals
are output.

If you select a monitor from “Monitor
Out”, other monitors than that you selected
display no menus.

Monitors
Select the number of monitors
connected to the system.

1: One monitor connected.
2: Two monitors connected.
3: Three monitors connected.

Connection
Selects the output connector to which
the device to be used is connected.
VIDEO 1: Selects the device connected

to the VIDEO 1 connector.

VIDEO 2: Selects the device connected

to the VIDEO 2 connector.

RGB OUT: Selects the device

connected to the RGB OUT
connector as the main monitor.

RGB OUT (DSB): Selects the device

connected to the RGB OUT
connector on the Data Solution Box.

Monitor
Allows you to define the monitor
connected to the corresponding
connector as the main monitor or the sub
monitor.
Main: Defines the monitor as the main

monitor.

Sub: Defines the monitor as the sub

monitor.

For details, see “Displaying the Picture

on a Projector or Monitor” on page 151.

Notes

Language

Language Setup Wizard

English

Next

Cancel

Note

Monitors

Connection

VIDEO1

VIDEO2

RGB OUT

RGB OUT(DSB)

Monitor

Monitor Setup Wizard

Sub

1

Sub

Main

Next

Previous

Cancel

Advertising
This manual is related to the following products: