Schneider Electric 174 CEV - Manual (Page 30)

Configuring the Bridge
26
3.1
Files Supplied With the Bridge
The bridge is shipped with its application software pre--installed. A Host Software
disk is provided containing files for managing the bridge application at a host PC.
3.1.1 Files Resident in the Bridge
These files are pre--installed and resident in the bridge:
Table 14 Files Resident in the Bridge
File Purpose
COMMAND.COM DOS command interpreter
AUTOEXEC.BAT Startup at bridge initialization
CONFIG.SYS Startup at bridge initialization
GATELOOP.BAT Runs the bridge application
SGATE.EXE Bridge application program
BDRESET.EXE Initializes the Modbus Plus card
MBPHOST.SYS Driver for the Modbus Plus card
CFGUTIL.EXE Configures the bridge IP setup, MB+ and TCP mapping
CFGUTIL.HLP Help screen for CFGUTIL.EXE
MBPSTAT.EXE Diagnostic tool for the Modbus Plus network connection
PING.EXE Diagnostic tool for the Ethernet network connection
TCPINFO.EXE Diagnostic tool for BOOTP server communication
WATTCP.CFG Contains the bridge’s IP setup and network parameters
PNPPD.COM Ethernet packet driver
3.1.2 Host Software Disk (31000017)
The bridge is supplied with one 3.5--inch (1.44 MB) disk, with files for configuring
the bridge at a host PC and downloading the configuration to the bridge. The disk
contains these files:
Table 15 Files on Host Software Disk
File Purpose
CFGUTIL.EXE Configures the bridge IP setup, MB+ and TCP mapping
CFGUTIL.HLP Help screen for CFGUTIL.EXE
DWNLD.EXE Download program for host
README Text file with current release information and application notes