Schneider Electric 174 CEV - Manual (Page 67)

Diagnostic Tools
64
6.7
Your MBPSTAT Menu
When MBPSTAT starts, your Options menu appears. The bridge’s node address
is at the top of the menu, together with the network routing path being analyzed.
Figure 21 MBPSTAT Menu
MODBUS PLUS NETWORK STATUS version 2.10
Node: 30
Adapter: 0 Routing: 22 24 00.00.00
SELECT OPTION
Use or type first char, then ENTER
1 Set Routing Parameters
2 Monitor Network Activity
3 Read Global Data
4 Global Data Present Table
5 Node Active Station Table
6 Node Error Statistics
7 Token Station Table
8 Token Owner Work Table
9 Current Internal Path Transactions
10 Show Node Personality
Q Quit
Copyright (c) SCHNEIDER AUTOMATION Inc. All Rights Reserved.
To select an option, use the cursor keys to move to the option, then press Enter.
You can also type in the option (1--10 or Q) and press Enter. To terminate any test
and return to your options menu, press Escape.
Entering Node Addresses
Some options analyze an overall network, and do not require selection of a node.
Other options analyze the activity of a single node. For those options, the program
will prompt you for a node address. When prompted, enter the address of the node
you wish to examine. Note that any node being analyzed will always be located on
the network you previously specified as the network routing path.