SUPER MICRO Computer SUPERSERVER 6015B-T - Manual (Page 51)

Chapter 5: Advanced Serverboard Setup
5-17
Wake-On-LAN
The Wake-On-LAN header is desig-
nated WOL. See the table on the right
for pin defi nitions. You must enable
the LAN Wake-Up setting in BIOS to
use this feature. You must also have
a LAN card with a Wake-on-LAN con-
nector and cable.
Wake-On-Ring
The Wake-On-Ring header is desig-
nated JWOR. This function allows
your computer to receive and "wake-
up" by an incoming call to the modem
when in suspend state. See the table
on the right for pin defi nitions. You
must have a WOR card and cable to
use this feature.
SMB
The System Management Bus header
(for the PCI bus) designated SMB is
located near the SATA ports. Connect
the appropriate cable here to utilize
SMB on your system. See the table
on the right for pin defi nitions.
Wake-On-Ring
Pin Defi nitions
(JWOR)
Pin# Defi nition
1 Ground (Black)
2 Wake-up
Wake-On-LAN
Pin Defi nitions (WOL)
Pin# Defi nition
1 +5V Standby
2 Ground
3 Wake-up
SMBUS_PS
The SMBUS_PS header is for I 2 C,
which may be used to monitor the
status of the power supply, fan and
system temperature. See the table on
the right for pin defi nitions.
SMB Header
Pin Defi nitions (SMB)
Pin# Defi nition
1 Data
2 Ground
3 Clock
4 No Connection
SMB Power (I 2 C)
Pin Defi nitions
(SMBUS_PS)
Pin# Defi nition
1 Clock
2 Data
3 Power Fail
4 Ground
5 +3.3V