SUPER MICRO Computer SUPERSERVER 6015B-T - Manual (Page 56)

5-22
S UPERSERVER 6015B-T+/6015B-8+ User’s Manual
Compact Flash Master/Slave
Select
A Compact Flash Master (Primary)/Slave
(Secondary) Select jumper is located at
JCF1. Close this jumper to enable the
use of a compact fl ash card. For the
compact fl ash card and JCF1 to work
properly, you will fi rst need to connect
the compact fl ash card's power cable
to JWF1. See the table on the right for
jumper settings.
Compact Flash Card Master/
Slave Select (JCF1)
Jumper Defi nition
Open Slave (Secondary)
Closed Master (Primary)
SMBUS to PCI Enable/
Disable
The JI 2 C1 and JI 2 C2 pair of jumpers al-
lows you to connect the System Man-
agement Bus to the PCI expansion
slots. The default setting is closed (on)
for both jumpers to enable the connec-
tion. Both connectors must be set the
same (JI 2 C1 is for data and JI 2 C2 is for
the clock). See the table on right for
jumper settings.
SMBUS to PCI
Enable/Disable
(JI 2 C1/JI 2 C2)
Jumper Setting Defi nition
Closed Enabled
Open Disabled