Savin DSc332 - Manual (Page 102)

Color Adjustment/Program
88
3
Color Balance
You can adjust the overall color tone
when the overall copy is reddish or
bluish.
Reference
For types and examples of the im-
age adjustment functions, see p.iii
“What You Can Do with This Ma-
chine <Color Functions/Color Ad-
justments>”.
AAAA
Press the
{{{{Adjust/Program Color}}}}
key.
BBBB
Make sure that [Color Balance] is
selected.
CCCC
Adjust by pressing [Lighter] or
[Darker]
.
Note
❒ You can also register the adjust-
ed settings. See p.88 “Color Bal-
ance Program”.
DDDD
Press [OK].
Note
❒ The indicator of the {{{{Adjust/Pro-
gram Color
}}}} key will light up
when adjusting the color bal-
ance.
❒ The adjusted settings will be de-
leted and the initial values will
be reset when either Auto Clear
has been performed, when the
{{{{Clear Modes}}}} key has been
pressed or when the power has
been turned off.
Color Balance Program
You can also store the color balance
setting in memory and recall it when
you want to use it.
Note
❒ You can store up to 3 programs.
❒ To change the registered settings,
register them again. Previously
registered settings will be over-
written.
Storing the adjusted color balance
AAAA
Press the {{{{Adjust/Program Color}}}}
Key.
Reference
See p.88 “Color Balance”.
BBBB
Press [Program Color Balance].
CCCC
Press [Program].
DDDD
Select a number (1–3) for this set-
ting.
The color balance setting will be
registered in the selected number.
Note
❒ If you select the program num-
ber key where the m is dis-
played, the previously registered
settings will be overwritten. See
p.89 “Changing the registered
settings”.
EEEE
Press [OK].
0827JupiterC1_Copy_EN_F1_FM.book Page 88 Thursday, September 4, 2003 5:06 PM