Savin DSc332 - Manual (Page 149)

Supplementary Specifications
135
6
❖ ❖ ❖ ❖ Duplex
• You cannot use the following copy paper with this function:
• Paper smaller than A5, 5 1 /
2
" × 8 1 /
2
" (possible on A5 K, 5 1 /
2
" × 8 1 /
2
" K)
• Paper thicker than 105 g/m 2 , 28 lb.
• Paper thinner than 60 g/m 2 , 17 lb.
• Translucent paper
• OHP transparencies
• Label paper (adhesive labels)
• Postcards
• When an odd number of originals is placed in the ADF, the back of the last
page of copied paper is blank.
• During copying, the image is shifted to allow for the binding margin.
• The following paper sizes can be duplexed: A3
L, B4 JISL, A4KL, B5
JIS KL, A5K, 11" × 17"L, 8 1 /
2
" × 14"L, 8 1 /
2
" × 11"KL
❖ ❖ ❖ ❖ Combine
• In this mode, the machine selects the reproduction ratio automatically.
This reproduction ratio depends on copy paper sizes and the number of
originals.
• The reproduction ratios you can specify are 25–400%.
• If the calculated ratio is under the minimum ratio, it will be automatically
adjusted to within acceptable range. However, with some ratios, parts of
the image might not be copied.
• You cannot use custom size paper.
• If the orientation of originals is different from that of the copy paper, the
machine will automatically rotate the image by 90
° to make copies proper-
ly.
• If the number of originals placed is less than the number specified for com-
bining, the last page segment will be left blank as shown.
0827JupiterC1_Copy_EN_F1_FM.book Page 135 Thursday, September 4, 2003 5:06 PM