Savin DSc332 - Manual (Page 57)

Copier Functions
43
2
AAAA
Press [Reduce/Enlarge].
BBBB
Press [Specifd. Ratio].
CCCC
Press [Dirc. Size Mag In].
DDDD
Enter the horizontal size of the
original using the number keys,
and then press [#].
EEEE
Enter the horizontal size of the
copy using the number keys, and
then press [#].
FFFF
Enter the vertical size of the origi-
nal using the number keys, and
then press [#].
GGGG
Enter the vertical size of the copy
using the number keys, and then
press [#].
Note
❒ To change the length, press the
key you want to change, and
then enter the new value.
HHHH
Press [OK] twice.
IIII
Place the originals, and then press
the
{{{{Start}}}} key.
Sort
The machine can scan originals into
memory and automatically sort cop-
ies.
Reference
Related default settings:
p.124 “Select Stack Function”
p.124 “Memory Full Auto Scan Re-
start”
p.124 “Rotate Sort: Auto Paper
Continue”
p.113 “Auto Tray Switching”
❖ ❖ ❖ ❖ Sort
Copies are assembled as sequen-
tially-ordered sets.
❖ ❖ ❖ ❖ Rotate Sort
Every other copy set is rotated by
90
°KL and delivered to the copy
tray.
Note
❒ To use the Rotate Sort function,
two paper trays with paper of
the same size and type, but dif-
ferent orientation (
KL), are re-
quired. See ”Paper Type: Tray1-
4”, General Settings Guide.
❒ You cannot use the bypass tray
with this function.
0827JupiterC1_Copy_EN_F1_FM.book Page 43 Thursday, September 4, 2003 5:06 PM