2programs, Storing a program – Savin DSc332 User Manual
Page 99
Programs
85
2
Programs
You can store frequently used copy
job settings in machine memory and
recall them for future use.
Note
❒ You can store up to 10 programs.
❒ You can select the standard mode
or program No. 10 as the default
mode to be set when modes are
cleared or reset, or immediately af-
ter the operation switch is turned
on. See p.113 “Change Initial
Mode”.
❒ Paper settings are stored based on
paper size. However, if you have
more than one paper tray contain-
ing same size paper, the tray prior-
itized with User Tools (System
Settings) is selected first. See “Pa-
per Tray Priority” in “Tray Paper
Settings”, General Settings Guide.
❒ Programs are not deleted by turn-
ing the power off or pressing the
{{{{Clear Modes}}}} key. They are can-
celed only when you delete or
overwrite them with another pro-
gram.
Storing a Program
AAAA
Edit the copy settings so all func-
tions you want to store in this pro-
gram are selected.
BBBB
Press the
{{{{Program}}}} key.
CCCC
Press [Register].
DDDD
Press the program number you
want to store.
Note
❒ Program numbers displayed
with
m next to them already
have settings.
Reference
p.86 “Changing a stored pro-
gram”
EEEE
Enter the program name using the
letter keys on the display panel.
You can enter up to 40 characters.
Reference
For details about entering char-
acters, see “Entering Text”, Gen-
eral Settings Guide.
Note
❒ If you do not want to enter a
program name, proceed to step
F
.
0827JupiterC1_Copy_EN_F1_FM.book Page 85 Thursday, September 4, 2003 5:06 PM