Size magnification, Directional magnification (%) – Savin DSc332 User Manual
Page 55
Copier Functions
41
2
Size Magnification
You can calculate an enlargement or
reduction ratio based on the lengths
of the original and copy.
Note
❒ Measure and specify the lengths of
the original and copy by compar-
ing "A" with "a".
AAAA
Press [Reduce/Enlarge].
BBBB
Press [Specifd. Ratio].
CCCC
Make sure [Size Magnificatn] is
highlighted.
DDDD
Enter the length of the original
using the number keys, and then
press [#].
Note
❒ You can enter sizes within the
following ranges:
EEEE
Enter the length of the copy using
the number keys, and then press [#].
Note
❒ To change the length after
pressing [#], select [Original] or
[Co py]
, and then enter the
length.
FFFF
Press [OK] twice.
GGGG
Place the originals, and then press
the
{{{{Start}}}} key.
Directional Magnification (%)
Copies can be reduced or enlarged at
different reproduction ratios, hori-
zontally and vertically.
a: Horizontal ratio
b: Vertical ratio
Note
❒ You can also select a preset ratio
close to the ratio using [Reduce] or
[Enlarge]
, and then adjust it further,
using [
n
n
n
n] or [o
o
o
o].
AAAA
Press [Reduce/Enlarge].
Metric
version
1–999 mm
(increments of 1 mm)
Inch
version
0.1"–99.9"
(increments of 0.1")
A"
a"
CP2P01EE
0827JupiterC1_Copy_EN_F1_FM.book Page 41 Thursday, September 4, 2003 5:06 PM