Savin DSc332 - Manual (Page 45)

Color Functions
31
2
Convert Colors
Copies by changing the color in the
original to a different color.
Note
❒ It is possible to specify up to 4 col-
ors.
❒ The width of the color to be con-
verted can be adjusted in 5 levels.
If the color width is set to “Wider”
and red has been specified, colors
which are close to magenta or or-
ange, will also be converted. The
color width can be adjusted in the
“User Tools”. See p.125 “Color
Sensitivity”
AAAA
Press the
{{{{Full Color}}}} key.
BBBB
Press [Edit/Color Creation].
CCCC
Press [Color Creation].
DDDD
Press [Convert Color].
EEEE
Select any one item from [Conver-
sion 1]
to [Conversion 4].
FFFF
Select the color to be converted.
GGGG
Select the new color to be convert-
ed.
Note
❒ You can adjust the density of
each color in 4 levels.
❒ When you want to change the
converted color, press from
[Conversion 1]
to [Conversion 4]
and make the selection again.
❒ When changing between more
than two colors, repeat steps
E
to
G.
Selecting from [User Color]
A Press [User Color].
B Select from the registered col-
ors, then press [OK].
HHHH
After selecting all the colors to be
converted, press [OK].
IIII
Press [OK] 3 times.
JJJJ
Place the originals, and then press
the
{{{{Start}}}} key.
0827JupiterC1_Copy_EN_F1_FM.book Page 31 Thursday, September 4, 2003 5:06 PM