Savin DSc332 - Manual (Page 139)

Settings You Can Change with User Tools
125
5
❖ ❖ ❖ ❖ Select Stapling Position
Specify which Top 2 staples or Bot-
tom shown on the initial display
with priority.
Note
❒ Default: Top 2
❒ The 2 tray finisher or booklet
finisher is required to use this
function.
❖ ❖ ❖ ❖ Letterhead Setting
If you select [Yes] for this function,
the machine rotates images cor-
rectly.
Note
❒ Default: No
❒ Orientation-fixed (top to bot-
tom) or two-sided paper might
not print correctly depending
on how the originals and paper
are placed.
Reference
When using letterhead paper,
pay attention to the paper orien-
tation. See “Orientation–Fixed
Paper or Two-Sided Paper” in
“Loading Paper”, General Set-
tings Guide.
Adjust Color Image
❖ ❖ ❖ ❖ Background Density of ADS(Full Col-
or / Two-color)
The background density is adjust-
ed to skip the texture and copy.
You can adjust the background
density up to 5 levels when in Full
Color or Two-color.
Note
❒ Default: Center of the 5 level ad-
justment
❖ ❖ ❖ ❖ Color Sensitivity
You can adjust the tone of red in
“Two color (Red & Black)”, the col-
or specified to convert in “Color
Convert” and the color specified
for “Erase Color”, in 5 levels.
Note
❒ Default: Center of the 5 level ad-
justment
❒ When the color width has been
set to “Wider”, and the color to
be deleted, for example is red,
all the colors that are close to
magenta and orange are delet-
ed. If it's set to “Narrower” the
color red will be deleted.
❖ ❖ ❖ ❖ A.C.S. Sensitivity
This 5-step setting determines the
level of the standard used for dis-
criminating between black & white
originals and full color originals
when “Auto Color Select” is select-
ed.
Note
❒ Default: Center of the 5 level ad-
justment
0827JupiterC1_Copy_EN_F1_FM.book Page 125 Thursday, September 4, 2003 5:06 PM