Savin DSc332 - Manual (Page 31)

Placing Originals
17
1
Placing originals of mixed sizes
When placing different size originals
of the same width in the ADF togeth-
er, the machine automatically checks
the sizes of the originals and makes
copies.
Note
❒ When placing same width origi-
nals of different sizes in the ADF
and making copies without using
the Mixed size function, parts of
the original image might not be
copied, or the paper might jam.
❒ Copy speed and scanning speed
may slow down.
❒ You can place originals of two dif-
ferent sizes at once.
❒ Sizes of originals that can be
placed together using this function
are as follows:
AAAA
Press [Special Original].
BBBB
Press [Mixed Size], and then press
[OK]
.
CCCC
Align the rear and left edges of
the originals as shown.
1. Place the originals into the ADF
2. Vertical size
DDDD
Adjust the guide to the size of the
widest original.
EEEE
Place the aligned originals face
up in the ADF.
FFFF
Press the
{{{{Start}}}} key.
Placing custom size originals
When placing custom size originals in
the ADF, specify the size of the origi-
nals.
Note
❒ Paper with a vertical size of 128–
297 mm (5.1"–11.6") and a horizon-
tal size of 128–432 mm (5.1"–17")
can be placed with this function.
AAAA
Press [Special Original].
BBBB
Press [Custm Size Origi.].
Metric
version A3 L, B4 JIS L, A4KL, B5
JIS KL
Inch
version 11" × 17"L, 8 1 /
2
" × 14"L,
8 1 /
2
" × 11"KL
1
2
CP19AN
11X17
X14
0827JupiterC1_Copy_EN_F1_FM.book Page 17 Thursday, September 4, 2003 5:06 PM