Savin DSc332 - Manual (Page 33)

19
2. Copying
Basic Procedure
AAAA
When the machine is set for user
codes, enter a user code (up to
eight digits) using the number
keys, and then press the
{{{{#}}}} key.
The machine is now ready to copy.
Reference
For users codes, see “Key Oper-
ator Tools”, General Settings
Guide.
BBBB
Make sure " d d d d Ready" is shown
on the display.
If any other function is displayed,
press the
{{{{Copy}}}} key.
❖ ❖ ❖ ❖ Initial copy display
CCCC
Make sure no previous settings
remain.
Note
❒ When there are previous set-
tings remaining, press the
{{{{Clear
Modes
}}}} key before entering your
settings.
DDDD
Place the originals.
Reference
p.13 “Placing Originals”
EEEE
Make the necessary settings.
FFFF
Enter the required number of cop-
ies using the number keys.
Note
❒ The maximum copy quantity
that can be set is between 1 and
999.
GGGG
Press the
{{{{Start}}}} key.
Copying starts.
Note
❒ When placing originals on the
exposure glass, press the {{{{#}}}}
key after all the originals are
scanned.
❒ Copies are delivered face down.
- - - -How to operate
❖ ❖ ❖ ❖ To stop the machine during a multi-
copy run
Press the
{{{{Clear/Stop}}}} key.
❖ ❖ ❖ ❖ To return the machine to the initial
condition after copying
Press the
{{{{Clear Modes}}}} key.
❖ ❖ ❖ ❖ When clearing entered values
Press the
{{{{Clear/Stop}}}} key or [Clear]
on the display.
❖ ❖ ❖ ❖ To check the settings
Press the
{{{{Check Modes}}}} key.
0827JupiterC1_Copy_EN_F1_FM.book Page 19 Thursday, September 4, 2003 5:06 PM