Siemens Gigaset S450IP - Manual (Page 13)

12
First steps
Gigaset S450 IP KBA / EN US / A31008-M1713-R321-2-6043 / starting.fm / 17.1.07
Ve
rs
ion 4,
16
.09.
2005
Downloading VoIP provider data
The phone establishes a connection with
the Siemens server on the Internet. Pro-
files with general access data for various
VoIP providers can be downloaded here.
After a short time the following is dis-
played:
q Select country (press up/down
on the control key) and press
§OK§ . The VoIP providers are
shown for which VoIP profiles
are available.
q Select your VoIP provider and
press §OK§ .
The necessary general access data for your
VoIP provider is downloaded and saved on
the phone.
Entering user data for your
VoIP account
Enter the VoIP user data for your VoIP
account. Your VoIP provider will supply
you with this information.
Username:
If required by your provider,
enter the user name and press
§OK§ .
Authent. Name:
Enter the registration name
and press §OK§ .
Authent. Password:
Enter password and press §OK§ .
Completing the VoIP settings
Once you have made all of the necessary
entries, the message " Connection data com-
plete " is displayed. The handset returns to
idle status.
If all of the settings are correct and if the
phone can make a connection to the VoIP
server, then the internal name of the
handset will be displayed (example):
You can now use your phone to make calls
via the fixed network (fixed line) and the
Internet! Callers can reach you on your
fixed network number and your VoIP
number!
If the data for your VoIP provider is not offered
as a download, press the display key ” .
You can then carry out the following steps as
instructed by the connection assistant.
You must then configure the necessary set-
tings for the VoIP provider using the Web con-
figurator (page 27). Your VoIP provider will
supply you with this information.
Select Country
Germany
England
France
Netherlands, the
Ý
OK
Note:
Please note when making these entries that
the VoIP user data is case sensitive. When
entering text, the first letter is capitalized as
standard. Press and hold the # key to switch
between upper/lower case text and numerical
entry.
Note:
To ensure that you can always be reached via
the Internet, the router must be permanently
connected to the Internet.
Ð V
INT 1
10.18.06 09:45 AM
FixedLine IP