Siemens Gigaset S450IP - Manual (Page 21)

20
Using the directory and lists
Gigaset S450 IP KBA / EN US / A31008-M1713-R321-2-6043 / directories_charges.fm / 17.1.07
Ve
rs
ion 4,
16
.09.
2005
Opening lists with the
message key
You can open the following lists with the
message key f:
u Incoming e-mail list
The list is only displayed if there are
new messages in the mailbox on the
incoming e-mail server.
u Messenger message list
The list is only displayed on the online
handset.
u Network mailbox
If your network provider supports this
function and the network mailbox is set
up for fast access via key 1 (page 15).
u Calls list
You can configure your calls list to
include all calls or just missed calls.
v
¢
Ð Settings
¢
Base
¢
Calls List Type
An advisory tone sounds as soon as a new
entry arrives in a list. The f key flashes
(it will go off when the key is pressed). In
idle status, the display shows an icon for
the new entry.
The number of new entries is shown
beneath the corresponding icon.
If you press the f key, the lists contain-
ing messages will be displayed (exception:
network mailbox). Lists with new mes-
sages are displayed in bold.
Opening a list
f
¢
If necessary, select the list
q Select entry.
You will find additional information about
the lists in the detailed user guide for your
Gigaset S450 IP on the Internet at
www.siemens.com/gigaset.
Dialing from the directory/list
¤
Open the directory/list.
¤
Select entry via q.
¤
Press and hold/briefly press the talk
key c (page 16).
Icon New entry...
à ... in network mailbox
Á ... in calls list
À ... in messenger or e-mail list
Note:
You can only dial IP addresses via VoIP.