Siemens Gigaset S450IP - Manual (Page 18)

17
Operating the handset
Gigaset S450 IP KBA / EN US / A31008-M1713-R321-2-6043 / telephony.fm / 17.1.07
Ve
rs
ion 4,
16
.09.
2005
You can accept the call by:
¤
Pressing the talk key c.
¤
Pressing the display key §Accept§ .
¤
Pressing the handsfree key d.
If the handset is in the charging cradle and
the Auto Answer function is activated
(page 15), the handset will take a call
automatically when you lift it out of the
cradle.
Waiting calls
If CLIP is activated and a waiting call is dis-
played, 4 different CID 2.5 services can be
selected.
During a call:
§Options§ Press the display key
Select with q:
Take msg
The waiting call is forwarded to the
central office mailbox.
Hold msg
The waiting call is put on hold and the
caller hears a message to this effect
from the central office.
Call back
The waiting caller is prompted by the
central office to call again at a later
time.
Add 2nd
The central office is prompted to
initiate a conference call.
Switching between earpiece and
handsfree mode
¤
Press handsfree key d to activate/
deactivate handsfree mode during a
call.
If you wish to place the handset in the
charging cradle during a call in handsfree
mode:
¤
Press and hold the handsfree key d
while placing the handset in the charg-
ing cradle. If the handsfree key d
does not light up, press the key again.
Dialing emergency numbers
The default setting for your phone is that
all numbers that are saved as emergency
numbers are automatically dialed via the
fixed network.
You can deactivate this function via the
Web configurator (see dialing plans,
page 27) (for example if you use the
phone without a fixed network). Ask
beforehand, however, whether your VoIP
provider supports emergency numbers.
Emergency numbers have been preset in
your phone. You can use the Web configu-
rator to display these numbers, enter addi-
tional emergency numbers or change
emergency numbers.
Operating the handset
Activating/deactivating the
handset
a Press and hold the end call
key.
You will hear the confirmation tone.
Activating/deactivating the
keypad lock
# Press and hold the hash key.
You will hear the confirmation tone. The
Ø icon appears in the display when the
keypad lock is activated.
Please note: If you have used Web configura-
tor to deactivate the function Emergency calls
always via fixed line and then entered an auto-
matic local area code for VoIP calls (Web page
Settings
£
Telephony
£
Dialing Plans , page 27),
then the local area code will also be inserted
before emergency numbers if they are dialed
using VoIP.