Siemens Gigaset S450IP - Manual (Page 29)

28
Appendix
Gigaset S450 IP KBA / EN US / A31008-M1713-R321-2-6043 / appendix.fm / 17.1.07
Ve
rs
ion 4,
16
.09.
2005
Appendix
Care
¤
Wipe down the base station and hand-
set with a damp cloth (no solvents) or
an antistatic cloth.
Never use a dry cloth. This can cause a
static build up.
Contact with liquid
If the handset has come into contact with
liquid:
¤
Switch the handset off and remove
the batteries immediately.
¤
Allow the liquid to drain from the hand-
set.
¤
Pat all parts dry, then with the battery
compartment open and the keypad fac-
ing down place the handset in a warm,
dry place for at least 72 hours (not in
a microwave, oven etc.).
¤
Do not switch on the handset again
until it is completely dry.
When it has fully dried out, you will nor-
mally be able to use it again.
Questions and answers
If you have any questions about using
your phone, visit us at
www.siemens.com/gigasetcustomercare
at any time. You will also find a list of com-
mon problems and possible solutions in
the detailed user guide.
Specifications
Recommended batteries
(Valid at the time of going to press)
Nickel-metal-hydride (NiMH):
u Sanyo Twicell 650
u Sanyo Twicell 700
u Panasonic 700 mAh "for DECT"
u GP 700mAh
u Yuasa Technology AAA Phone 700
u VARTA Phone Power AAA 700mAh
u GP 850mAh
u Sanyo NiMH 800
u Yuasa Technology AAA 800
The handset is supplied with two recom-
mended batteries.
Handset operating times/charging
times
The following information relates to bat-
teries with a capacity of 650 mAh.
The operating and charging times apply
only when using the recommended bat-
teries.
Base station power consumption
Depending on current status, around
2.5 W.
!
Standby time approx. 170 hours (7 days)
Talktime approx. 13 hours
Charging time approx. 6 hours
Note:
When the display backlight is switched on, the
standby time of the handset is reduced to
approx. 30 hours.