Siemens Gigaset S450IP - Manual (Page 26)

25
Handset/base station settings
Gigaset S450 IP KBA / EN US / A31008-M1713-R321-2-6043 / settings_bs_hs_pabx.fm / 17.1.07
Ve
rs
ion 4,
16
.09.
2005
Deactivating the ringer tone for the current
call
§Silence§ Press the display key.
Activating/deactivating advisory
tones
v
¢
Ð Settings
¢
Audio Settings
¢
Advisory Tones
¤
Change multiple line input:
Key Tones: / Confirm.:
Select On or Off .
Battery:
Select On , Off or In Call . The battery
warning tone is only activated/deacti-
vated and only sounds during a call.
¤
Save changes with §Save§ .
Setting the alarm clock
Precondition: The date and time have
already been set (page 7).
Activating/deactivating the alarm
clock and setting the wake-up time
v
¢
ì Alarm Clock
¤
Change multiple line input:
Activation:
Select On or Off .
Time:
Enter the wake-up time in 4-digit for-
mat.
Melody:
Select melody.
Volume:
Set the volume (1-6).
¤
Save changes with §Save§ .
You will see the ¼ icon.
When the alarm clock rings ...
Alarm repeat after 5 minutes
§Snooze§ Press the display key or any
key.
After the second repetition the wake-up
call is deactivated for 24 hours.
Deactivating the alarm clock for 24 hours
§OFF§ Press the display key. The
wake-up call is deactivated.
Changing the system PIN on
the base station
You can change the base station's 4-digit
default system PIN ("0000") to a 4-digit
system PIN known only to yourself.
v
¢
Ð Settings
¢
Base
¢
System PIN
~ Enter the current system PIN
and press §OK§ .
~ Enter the new system PIN.
s Scroll to the Re-enter PIN: line.
~ Now reenter the new system
PIN and press §OK§ .
For security reasons, "****" is displayed
instead of the system PIN.
a
Press and hold (idle status).
Setting default connection
You can configure settings according to
whether you want to make calls via VoIP or
fixed network by default (press talk key
briefly).
v
¢
Ð Settings
¢
Telephony
¢
Default Line
VoIP / Fixed Line
Select and press §OK§ ( ½ = on).