Siemens Gigaset S450IP - Manual (Page 20)

19
Using the directory and lists
Gigaset S450 IP KBA / EN US / A31008-M1713-R321-2-6043 / directories_charges.fm / 17.1.07
Ve
rs
ion 4,
16
.09.
2005
Using the directory and lists
The options are:
u Directory
u Last number redial list
u E-mail and messenger lists
u Calls list
Directory
You can save up to 150 numbers and
names in the directory.
¤
Open the directory by briefly pressing
the s key in idle status.
Length of an entry
Number: max. 32 digits
Name: max. 16 characters
Saving a number in the directory
s
¢
New Entry
¤
Change multiple line input:
Number:
Enter number.
Name:
Enter name.
Annivers.:
Press the display key §Edit§ and enter the
date, reminder time and type of signal.
Speed Dial:
Select the digit keys for speed dial
( Q, 2 to O).
The number is dialed via the non-
default connection if you press and
hold the assigned digit key in idle sta-
tus.
¤
Save changes with §Save§ .
Managing directory entries
s
¢
s (Select entry)
¤
Press the display key §View§ to view the
entry
Or
¤
Press the display key §Options§ to open
the directory menu.
You can use the directory menu to, for
example:
u Change entries, delete entries, mark
entries as a VIP (Very Important Per-
son) or send them to other handsets
connected to the base station
u Delete the directory or send it to
another handset
You will find additional information in
the detailed user guide for your
Gigaset S450 IP on the Internet at
www.siemens.com/gigaset.
Last number redial list
The last number redial list contains the ten
numbers last dialed with the handset.
C
Briefly press the key to open
the last number redial list.
Notes:
Always enter the phone number with an area
code. You will need this if you want to call a
fixed network subscriber via VoIP.
Alternatively, via the Web configurator you can
also specify an area code to be placed before
all numbers dialed without an area code.
Note:
If you add a star (*) to the end of the number,
the number will be dialed via the non-default
connection (page 25), even if you briefly press
the talk key c.