Led indicators, Figure 3: leds, Table 2: led behavior – SMC Networks BARRICADETM N SMCWBR11S-3GN User Manual
Page 24: Led i
C
HAPTER
1
| Introduction
Hardware Description
– 24 –
LED I
NDICATORS
The Mini 3G Broadband Router includes four status LED indicators, as
described in the following figure and table.
Figure 3: LEDs
Table 2: LED Behavior
LED
Status
Description
Power
On Blue
The unit is receiving power and is operating normally.
Off
There is no power currently being supplied to the
unit.
WLAN
On/Blinking Blue
The 802.11n radio is enabled and
transmitting or receiving data through wireless links.
Off
The 802.11n radio is disabled.
WAN
On Blue
The Ethernet WAN port is aquiring an IP address.
Blinking
The Ethernet WAN port is connected and is
transmitting/receiving data.
Off
The Ethernet WAN port is disconnected or has
malfunctioned.
LAN
On Blue
The Ethernet LAN port is connected to a PC or server.
Blinking
The Ethernet port is connected and is transmitting or
receiving data.
Off
The Ethernet port is disconnected or has
malfunctioned.
3G USB
On Blue
A 3G connection has been established.
Slow Blinking
A 3G connection is in progress.
Fast Blinking
The wrong 3G PIN code has been entered, or the 3G
budget limit has been reached.
5 Blinks Cycle
The 3G pre-limit budget has been reached.
Off
There is no modem connected to the 3G USB port, or
the device has failed.
WLAN
LAN
WAN
Power
WPS SET
3G USB
LAN
WLAN
Power
WAN
3G USB