Pptp, Figure 29: pptp configuration – SMC Networks BARRICADETM N SMCWBR11S-3GN User Manual
Page 59
C
HAPTER
6
| Network Settings
WAN Setting
– 59 –
PPTP
Enables the Point-to-Point Tunneling Protocol (PPTP) for implementing
virtual private networks. The service is provided in many European
countries.
Figure 29: PPTP Configuration
The following items are displayed on this page:
◆
Server IP — Sets a PPTP server IP Address. (Default: pptp_server)
◆
User Name — Sets the PPTP user name for the WAN port. (Default:
pptp_user; Range: 1~32 characters)
◆
Password — Sets a PPTP password for the WAN port. (Default:
pptp_password; Range: 1~32 characters)
◆
Verify Password — Prompts you to re-enter your chosen password.
◆
Address Mode — Sets a PPTP network mode. (Default: Dynamic)
◆
IP Address — Sets the static IP address. (Default: 0.0.0.0, available
when PPTP Network Mode is set to static IP.)