SMC Networks BARRICADETM N SMCWBR11S-3GN - Manual (Page 45)

C HAPTER 4 | Initial Configuration
Setup Wizard
– 45 –
S TEP 3 - WAN
S ETTINGS - 3G
Enables support for a USB 3G modem as a WAN connection, either as a
primary (Master) link, or as a backup to the WAN port link.
Figure 21: Wizard Step 3 - WAN Settings - 3G
The following items are displayed on this page:
◆ Ethernet Port — Select the WAN port connection type from the drop-
down list. Alternatively, you can disable the Ethernet WAN port
connection and just use the USB 3G modem connection.
■
Enable MAC Clone — Some ISPs limit Internet connections to a
specified MAC address. This setting allows you to manually change
the MAC address of the Mini 3G Broadband Router’s WAN interface
to match the PC's MAC address provided to your ISP for
registration. You can enter the registered MAC address manually by
typing it in the boxes provided. Otherwise, connect only the PC with
the registered MAC address to the Mini 3G Broadband Router, then
click the “Clone your PC’s MAC Address.” (Default: Disable)