SMC Networks BARRICADETM N SMCWBR11S-3GN - Manual (Page 41)

C HAPTER 4 | Initial Configuration
Setup Wizard
– 41 –
◆ USB Port — Enables support for a WAN connection using a USB 3G
modem. For more information, see “Step 3 - WAN Settings - 3G” on
page 45 . (Default: Disabled)
◆ User Name — Sets the PPPoE user name for the WAN port.
(Default: pppoe_user; Range: 1~32 characters)
◆ Password — Sets a PPPoE password for the WAN port.
(Default: pppoe_password; Range: 1~32 characters)
◆ Verify Password — Prompts you to re-enter your chosen password.
◆ Operation Mode — Enables and configures the keep alive time and
configures the on-demand idle time.
S TEP 3 - WAN
S ETTINGS - PPTP
Enables the Point-to-Point Tunneling Protocol (PPTP) for implementing
virtual private networks. The service is provided in many European
countries.
Figure 19: Wizard Step 3 - WAN Settings - PPTP
The following items are displayed on this page:
◆ Ethernet Port — Select “PPTP” for the WAN port connection from the
drop-down list.
■
Enable MAC Clone — Some ISPs limit Internet connections to a
specified MAC address. This setting allows you to manually change