SMC Networks BARRICADETM N SMCWBR11S-3GN - Manual (Page 37)

C HAPTER 4 | Initial Configuration
Setup Wizard
– 37 –
S TEP 2 - T IME
S ETTINGS
The Step 2 page of the Wizard configures time zone and SNTP settings.
Select a time zone according to where the device is operated. Click Next
after completing the setup.
Figure 15: Wizard Step 2 - Time and SNTP Settings
The following items are displayed on this page:
◆ Current Time — Receives a time and date stamp from an SNTP server.
◆ Sync with host — Updates the unit's time from the web management
PC's system time.
◆ Time Zone — Select the time zone that is applicable to your region.
◆ SNTP Server — Enter the address of an SNTP server to receive time
updates.
◆ SNTP synchronization (hours) — Specify the interval between SNTP
server updates.
S TEP 3 - WAN
S ETTINGS - DHCP
The Step 3 page of the Wizard specifies the Internet connection
parameters for the Mini 3G Broadband Router’s WAN port. Click Next after
completing the setup.
By default, the WAN port is configured with DHCP enabled. The options are
Static IP, DHCP (cable modem), PPPoE (DSL modem), PPTP, and L2TP. Each
option changes the parameters that are displayed on the page.
You can also enable support for a USB 3G modem as a WAN connection,
either as a primary (Master) link, or as a backup to the WAN port link.