SMC Networks BARRICADETM N SMCWBR11S-3GN - Manual (Page 29)

– 29 –
3
I
NSTALLING THE
M
INI
3G R
OUTER
The Mini 3G Broadband Router has two basic operating modes that can be
set through the web-based management interface. For information on
setting the mode suitable for your network environment. See “Operation
Mode” on page 53 .
◆ Router Mode — A gateway mode that connects a wired LAN and
wireless clients to an Internet access device, such as a cable or DSL
modem. This is the factory set default mode.
◆ Bridge Mode — An access point mode that extends a wired LAN to
wireless clients.
In addition to these basic operating modes, the wireless interface supports
Wireless Distribution System (WDS) links to other Mini 3G Broadband
Routers. These advanced configurations are not described in this section.
See “Network Planning” on page 26 for more information.
In a basic configuration, how the Mini 3G Broadband Router is connected
depends on the operating mode. The sections in this chapter describe
connections for basic Router Mode and Bridge Mode operation.
S YSTEM R EQUIREMENTS
You must meet the following minimum requirements:
◆ An Internet access device (DSL or Cable modem) with an Ethernet port
connection.
◆ An up-to-date web browser: Internet Explorer 6.0 or above or Mozilla
Firefox 2.0 or above.